TET, summarizing US Tippins' experiences of many years in design and manufacture of cold temper mill, has developed serial cold temper mills according to the width of the series which is divided into six specifications :700, 900, 1100, 1300, 1500, 1700, or designed to meet the client's requirements.

Based on US Tippins' technologies and on site utilization, TET can provide process data, machinery, electric equipment, hydraulic and automatic control of the temper mill (which guarantees the consistency in machinery, electricity and hydraulic). TET can carry out entire turnkey engineering, including design, manufacture, erection and commissioning. TET can also work with other companies to provide users with high-quality formation units.

Technical specification: The specifications (including all scope of serial temper mill) as transcribed below:

Formation materials : carbon steel and low alloy steel, stainless steel and other materials Strip.

Formation zone thickness : 0.1-3mm;

Formation bandwidth : 450 ~ 1560mm

Coil diameter : 900 > 2100 mm

Coil unit width Weight : 11 ~ 19kg/mm

Formation elongation : 1 ~ 3% (dry formation); 1 ~ 5% (wet formation)

Formation rate : According to the requirements of the productivity speed range: 300 ~ 1260 m / min.

Output: 15 ~ 400 thousand tons.

Production process overview: The workshop with the cable car will need to be addressed, it should hand on imported steel coil storage platform coil loading coil sent to the coil - Preparation of the first cutting station, bending into the lead on the uncoiler usually begins with thick less than or equal to 1 mm strip through S roller sent temper before adjustment temper roll gap after formation, and then roll through the export of the S coiling machine coiling. With greater than 1 mm thick strip through the S Roller roller directly into temper formation. The specific-volume, according to S Rolls issued the directive unit parking brake automatically.Shear Segmentation coiling machine rolls, End of the export volume of finished steel coil cars spell out, on exports saddle and completed bale weighing processes.

Technical Features:

The temper mill can provide two modes of automatic control and manual control. The cost of manual is about ¾ or ½ of that of the automatic. Manual control features : constant rolling force control, automatic threading and unloading coil, entire digital drive control system, PLC control Automatic control features: constant elongation control, constant rolling force control, automatic threading and unloading coil, automatic accelerating, decelerating and shutting down, total digital drive control system, Plc control.

Main Features:

High level automation control, automatic strip edge guide system, constant pressure control, opening control system and tension control system. Two temper processes: wet temper and dry temper.

Greater quality, one mill installed (CPC or EPC), roll bending system, anti-dancing roll and anti-crimping roll.

Greater capacity, as the coil preparation station built up at the head of the mill.

The bearings of working roll, backup roll, entry and exit S- roll will utilize oil- air lubrication.

Utilizes quick roll change system for promoting work efficiency

Main facilities (major equipment units):

Main facilities consist of the payoff reel, temper mill and tension reel etc, otherwise other auxiliary facilities and configuration can be provided to customer's specification. Item equipment unit comprised of: Coil storage saddles, coil transfer car, coil preparation station, scrap coil kick-off device, payoff reel, CPC(or EPC), entry S-rolls, exit S-rolls, electrostatic oiler, belt wrapper, exit coil transfer car, coil bander, coil weight scale, hydraulic system, electric control system, lubrication system.